Eibach EMS Moto Rear Shock Spring Kit Suzuki DR 250 350 Honda XR 350 500
Eibach's MOTO Shock springs provide tuning capability for maximum perfromance and durability on any terrain.
- Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
- Ultra-Lightweight for Reduced Unsprung Mass
- Each Spring Individually Tested
- Highest Linearity and Guaranteed Consistency
- Made In U.S.A.
Note: Color Update: Springs may vary between black and silver in color.
Note: We do not guarantee fitment, height or warranties on unlisted applications.
Sold Individually.
Eibach Limited Lifetime Warranty
1. Eibach Limited Lifetime Warranty
All Eibach, Inc. ("Eibach") Suspension Springs, Anti-Roll-Kits, Pro-Spacers, Pro-Dampers and Pro-Truck Shocks (including Sport and Sport Leveling), Pro-Truck Coilover Systems, Pro-Alignment Kits, (collectively, "Products") are covered by a limited lifetime warranty, (the Warranty). The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions. These Warranties only apply to the original purchaser, who has proof of purchase and retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach, Inc. will repair, replace or refund the purchase price of the defective product at Eibach, Inc.'s sole digression, which shall fully satisfy and discharge any and all warranty claims.
2. Exclusions from Warranty
This warranty does not apply to any products:
a. That have been improperly installed or have not been properly installed by a qualified, licensed auto mechanic experienced in the installation and removal of suspension products.
b. That have been improperly serviced, that have been misused, or that have been modified, altered or subjected to abuse, negligence, accident or collision.
c. Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits.
c. Installed on any vehicle that has been used for rallying, racing or racing-type activities or extreme off-road use.
d. Presented for warranty coverage by a person other than the purchaser.
e. Presented for warranty coverage after being used on a vehicle other than the one on which it was originally installed.
3. Reservation of Rights
Eibach reserves the right to make changes in design, materials and specifications, and to make changes to Products without prior notice. Eibach does not assume any obligation to modify any previously manufactured Products.
4. Exclusion of Other Warranties
This Warranty is the entire and only Warranty for the Products and may not be modified or supplemented by any other person or company in any form. Any description of the Products, by anyone, is for the sole purpose of identifying them, is not part of the basis of the bargain, and does not constitute a warranty that the Products will conform to that description. The use of any sample or model in connection with these Warranties or the sale of any Products is for illustrative purposes only and is not a warranty that the goods will conform to the sample or model. The statements of any salesperson do not constitute part of these Warranties or any warranty at all and cannot be relied upon as a warranty.
There are no warranties, expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose, which extend beyond the description on the face hereof. Any implied warranties are disclaimed to the fullest extent permitted by law and shall in no event exceed the purchase price of the product. These warranties do not cover consequential damages, loss of time or revenues, inconvenience, loss of use of the vehicle, damage to the vehicle or components of the vehicle, reimbursement for labor, any other type of consequential damages, or other incidental or indirect damages.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages; in such states the above limitations or exclusions may not apply. These Warranties give the Purchaser specific legal rights, and the Purchaser may have other rights that may vary from state to state.
5. Warranty Claim Procedure
To make a claim, the Purchaser should contact the Eibach dealer/ distributor from which the Products were originally purchased. The dealer/distributor should then contact Eibach to obtain a Return Goods Authorization (RGA) number to return the Products to Eibach.
Any and all returns must be accompanied by (1) an RGA number, (2) a sales receipt verifying the purchase of the Products, and (3) a statement containing the Purchaser's name, address, make and model of the vehicle, and a brief description of the claimed defect, including the circumstances under which the defect occurred.
Warranty related inquiries should be mailed to the following address:
Eibach Suspension Technology.
Unit 3/4 Prosperity Parade Warriewood NSW 2102
Eibach will not accept Product returns without the RGA number, receipt and statement described above. C.O.D. or collect shipments will be refused. Once the returns are received at Eibach, Eibach will evaluate the Products, verify the sales receipt, and investigate the statement.
The Purchaser is responsible for returning the Products to the Eibach dealer/distributor, including shipping costs as well as costs incurred for removing and installing the Products on the vehicle. Eibach does not warranty labor costs.
SKU | 893 |
Brand | Eibach Suspension Technology |
Shipping Weight | 1.5000kg |
Shipping Size | 0.010 x 0.010 x 0.280m |
Unit Of Measure | ea |
If your Motorcycle is listed below, this product will suit:
- HONDA XR350R 1983
- HONDA XR350R 1984
- HONDA XR350R 1985
- HONDA XR500R 1983
- HONDA XR500R 1984
- SUZUKI DR-Z250 2000
- SUZUKI DR-Z250 2001
- SUZUKI DR-Z250 2002
- SUZUKI DR-Z250 2003
- SUZUKI DR-Z250 2004
- SUZUKI DR-Z250 2005
- SUZUKI DR-Z250 2006
- SUZUKI DR-Z250 2007
- SUZUKI DR-Z250 2008
- SUZUKI DR-Z250 2009
- SUZUKI DR-Z250 2010
- SUZUKI DR-Z250 2011
- SUZUKI DR-Z250 2012
- SUZUKI DR-Z250 2013
- SUZUKI DR-Z250 2014
- SUZUKI DR-Z250 2015
- SUZUKI DR-Z250 2016
- SUZUKI DR-Z250 2017
- SUZUKI DR-Z250 2018
- SUZUKI DR-Z250 2019
- SUZUKI DR-Z250 2020
- SUZUKI DR-Z250 2021
- SUZUKI DR-Z250 2022
- SUZUKI DR-Z250 2023
- SUZUKI DR-Z250 2024
- SUZUKI DR-Z250 2025
- SUZUKI DR250 1990
- SUZUKI DR250 1991
- SUZUKI DR250 1992
- SUZUKI DR250 1993
- SUZUKI DR250R 1997
- SUZUKI DR250R 1998
- SUZUKI DR250R 1999
- SUZUKI DR250R 2000
- SUZUKI DR250S 1982
- SUZUKI DR250S 1983
- SUZUKI DR250S 1984
- SUZUKI DR250S 1985
- SUZUKI DR250S 1986
- SUZUKI DR250S 1987
- SUZUKI DR250S 1988
- SUZUKI DR250S 1989
- SUZUKI DR250S 1990
- SUZUKI DR250S 1991
- SUZUKI DR250S 1992
- SUZUKI DR250S 1993
- SUZUKI DR250S 1994
- SUZUKI DR250S 1995
- SUZUKI DR250SE 1990
- SUZUKI DR250SE 1991
- SUZUKI DR250SE 1992
- SUZUKI DR250SE 1993
- SUZUKI DR250SE 1994
- SUZUKI DR250SE 1995
- SUZUKI DR350 (Kickstart non ADR) 1990
- SUZUKI DR350 (Kickstart non ADR) 1991
- SUZUKI DR350 (Kickstart non ADR) 1992
- SUZUKI DR350 (Kickstart non ADR) 1993
- SUZUKI DR350 (Kickstart non ADR) 1994
- SUZUKI DR350 (Kickstart non ADR) 1995
- SUZUKI DR350 (Kickstart non ADR) 1996
- SUZUKI DR350 (Kickstart non ADR) 1997
- SUZUKI DR350 (Kickstart non ADR) 1998
- SUZUKI DR350 (Kickstart non ADR) 1999
- SUZUKI DR350 SE 1994
- SUZUKI DR350 SE 1995
- SUZUKI DR350 SE 1996
- SUZUKI DR350 SE 1997
- SUZUKI DR350 SE 1998
- SUZUKI DR350 SE 1999
- SUZUKI DR350S 1990
- SUZUKI DR350S 1991
- SUZUKI DR350S 1992
- SUZUKI DR350S 1993
- SUZUKI DR350S 1994
Colour | Metallic Black |
Spring Large ID (mm) | 55.0 |
Spring Small ID (mm) | 52.0 |
Spring Free Length (mm) | 273 |
More From This Category
HiCalibre Shock Spring 55 x 240 Common Fitment Hon
Proudly made in the USA(SKU: 20-030)
From
$245.00
HiCalibre Shock Spring 63 x 260 (Eibach 896) Commo
Proudly made in the USA(SKU: 20-095)
From
$245.00
Eibach EMS Moto Rear Shock Spring Kit 63.9/66.4 x
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 899)
From
$249.94
Eibach ERS Shock Springs 51 x 127
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 0500.200)
From
$181.50
HiCalibre Shock Spring 55 x 310 Yamaha OEM 90501-9
Proudly made in the USA(SKU: 20-026)
From
$295.00
HiCalibre Shock Spring 55 x 225 Common Fitment Yam
Proudly made in the USA(SKU: 20-025)
From
$245.00
HiCalibre Shock Spring 51 x 290 Common Fitment Hon
Proudly made in the USA(SKU: 20-012)
From
$295.00
HiCalibre Shock Spring 55 x 208 Common Fitment Yam
Proudly made in the USA(SKU: 20-024)
From
$245.00
Eibach EMS Moto Rear Shock Spring Kit 62.2 x 265 K
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 898)
From
$249.94
HiCalibre Shock Spring 59 x 275 Common Fitment: Oh
Proudly made in the USA(SKU: 20-076)
From
$245.00
HiCalibre Shock Spring 63.5/65.5 x 280 (64_66-275)
Proudly made in the USA(SKU: 20-135)
From
$245.00
Eibach EMS Moto Rear Shock Spring Kit 63 x 250 KTM
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 896)
From
$249.94
Eibach ERS Shock Springs 51 x 152
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 0600.200)
From
$181.50
Eibach EMS Moto Rear Shock Spring Kit 63/65 x 257
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 897)
From
$249.94
Eibach EMS Moto Rear Shock Spring Kit 63 x 260mm K
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 879)
From
$249.94
HiCalibre Shock Spring 57 x 210 Common Fitment Yam
Proudly made in the USA(SKU: 20-048)
From
$245.00