Motorcycle Fork Rebound Adjuster Needles & Springs

Many motorbikes - especially offroad or sports bikes - have adjustable suspension damping. If you've never adjusted yours, see our clicker article for the basics. Adjusters mean you can tune your settings for racing or for comfort by getting the front end to react well to that particular terrain. If you're pushing through sand, you aren't getting the same forces as bouncing off tree roots & rocks, so you need to adjust your fork legs to match - for what to tune on what surface check our suspension setup tips.

These KYB & Showa OEM adjustment internals help you rebuild your existing adjusters to save money or we sell complete factory assemblies to save you time.

Compression clickers are traditionally at the top on the fork cap; so if you are looking for other comp adjuster parts you should check out our Compression Adjuster Assembly section.
Rebound clickers are traditionally at the base, inside the bottom axle lug and attached to the inner cartridge rod; if you are looking for other reb adjuster parts you should check out our Cartridge Rod Parts section.
Teknik have upgraded tuning knobs for both of your clickers too.

Many newer bikes feature "Split Function Forks" - where comp damping is handled by only one leg & reb damping by the other - meaning both adjusters are up the top on the caps. This is especially true for air forks and it's a nice change not having to crouch down awkwardly in the mud while spinning tools!