Xtrig ROCS Pro Triple Clamps

Revolutionary Opposed Clamping System (ROCS) clamps the upper fork tube from opposite directions, which holds the tube more securely without additional torque on the pinch bolts. This reduces inner tube distortion and allows the fork to flex more consistently. The triple clamp system’s flexibility is adapted specifically to the forks and chassis. Altering triple clamp flexibility results in improved front wheel traction wit the Xtrig ROCS design.

The difference between the ROCS “TECH” and the ROCS “PRO” is the “TECH” uses a standard offset with a pressed shaft tube. The “PRO” has two offsets you can choose from by simply adjusting the shaft tube (or steering stem). The PRO also has a new steering stem nut with a lock bolt for added security.

  • Handlebars can be mounted in 12 different positions with the PHDS, FIX or FLEX systems from Xtrig.
  • The X-CLAMP system lets you adjust the offset Displays the current offset setting Precise alignment of the fork tube
  • Stiffness of the steering stem is perfectly tuned to the respective motorcycle model
  • Steering-head bearing is already mounted on the shaft tube
  • Special fork slot and clamping for precise fork operation
  • Precise clamping with special screws for low torque Improved flex points for more front tire traction and a more planted feel

Teknik Motorsport carries the full range of XTrig Adjustable Racing Parts.

Thank you for choosing XTRIG. All XTRIG products are designed and manufactured to the highest standards using the best materials available.

XTRIG cannot be held responsible for incorrect assembly or the incorrect use of the product. Please follow the installation instructions. Expert advice and correct installation of

Any part that, in our opinion, was used, installed, handled, packaged, or shipped improperly by the customer will not be eligible for exchange, refund, or warranty.

Parts used for racing or competition are warranted against manufacturing defects only. They are not warranted for wear or breakage under any circumstance.

SKU 40601001
Brand XTRIG
Shipping Weight 2.4500kg
Shipping Size 0.310 x 0.160 x 0.355m
Unit Of Measure ea
Type Xtrig Triple Clamps Rocs PRO

If your Motorcycle is listed below, this product will suit:

Colour X-Trig Brown
Offset (mm) 20-23

You May Also Like

Related products

More From This Category