Features
Eibach's MOTO springs provide tuning capability for maximum performance and durability on any terrain.
- Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
- Ultra-Lightweight for Reduced Unsprung Mass
- Each Spring Individually Tested
- Highest Linearity and Guaranteed Consistency
- Made In U.S.A.
Note:We do not guarantee fitment, height or warranties on unlisted applications.
Eibach Limited Lifetime Warranty
1. Eibach Limited Lifetime Warranty
All Eibach, Inc. ("Eibach") Suspension Springs, Anti-Roll-Kits, Pro-Spacers, Pro-Dampers and Pro-Truck Shocks (including Sport and Sport Leveling), Pro-Truck Coilover Systems, Pro-Alignment Kits, (collectively, "Products") are covered by a limited lifetime warranty, (the Warranty). The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions. These Warranties only apply to the original purchaser, who has proof of purchase and retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach, Inc. will repair, replace or refund the purchase price of the defective product at Eibach, Inc.'s sole digression, which shall fully satisfy and discharge any and all warranty claims.
2. Exclusions from Warranty
This warranty does not apply to any products:
a. That have been improperly installed or have not been properly installed by a qualified, licensed auto mechanic experienced in the installation and removal of suspension products.
b. That have been improperly serviced, that have been misused, or that have been modified, altered or subjected to abuse, negligence, accident or collision.
c. Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits.
c. Installed on any vehicle that has been used for rallying, racing or racing-type activities or extreme off-road use.
d. Presented for warranty coverage by a person other than the purchaser.
e. Presented for warranty coverage after being used on a vehicle other than the one on which it was originally installed.
3. Reservation of Rights
Eibach reserves the right to make changes in design, materials and specifications, and to make changes to Products without prior notice. Eibach does not assume any obligation to modify any previously manufactured Products.
4. Exclusion of Other Warranties
This Warranty is the entire and only Warranty for the Products and may not be modified or supplemented by any other person or company in any form. Any description of the Products, by anyone, is for the sole purpose of identifying them, is not part of the basis of the bargain, and does not constitute a warranty that the Products will conform to that description. The use of any sample or model in connection with these Warranties or the sale of any Products is for illustrative purposes only and is not a warranty that the goods will conform to the sample or model. The statements of any salesperson do not constitute part of these Warranties or any warranty at all and cannot be relied upon as a warranty.
There are no warranties, expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose, which extend beyond the description on the face hereof. Any implied warranties are disclaimed to the fullest extent permitted by law and shall in no event exceed the purchase price of the product. These warranties do not cover consequential damages, loss of time or revenues, inconvenience, loss of use of the vehicle, damage to the vehicle or components of the vehicle, reimbursement for labor, any other type of consequential damages, or other incidental or indirect damages.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages; in such states the above limitations or exclusions may not apply. These Warranties give the Purchaser specific legal rights, and the Purchaser may have other rights that may vary from state to state.
5. Warranty Claim Procedure
To make a claim, the Purchaser should contact the Eibach dealer/ distributor from which the Products were originally purchased. The dealer/distributor should then contact Eibach to obtain a Return Goods Authorization (RGA) number to return the Products to Eibach.
Any and all returns must be accompanied by (1) an RGA number, (2) a sales receipt verifying the purchase of the Products, and (3) a statement containing the Purchaser's name, address, make and model of the vehicle, and a brief description of the claimed defect, including the circumstances under which the defect occurred.
Warranty related inquiries should be mailed to the following address:
Eibach Suspension Technology.
Unit 3/4 Prosperity Parade Warriewood NSW 2102
Eibach will not accept Product returns without the RGA number, receipt and statement described above. C.O.D. or collect shipments will be refused. Once the returns are received at Eibach, Eibach will evaluate the Products, verify the sales receipt, and investigate the statement.
The Purchaser is responsible for returning the Products to the Eibach dealer/distributor, including shipping costs as well as costs incurred for removing and installing the Products on the vehicle. Eibach does not warranty labor costs.
SKU | 903 |
Brand | Eibach Suspension Technology |
Shipping Weight | 1.5000kg |
Shipping Size | 0.140 x 0.060 x 0.580m |
If your Motorcycle is listed below, this product will suit:
- HONDA CRF250R 2018
- HONDA CRF250R 2019
- HONDA CRF250R 2020
- HONDA CRF250R 2021
- HONDA CRF250R 2022
- HONDA CRF250R 2023
- HONDA CRF250R 2024
- HONDA CRF250R 2025
- HONDA CRF250RX 2022
- HONDA CRF250RX 2023
- HONDA CRF250RX 2024
- HONDA CRF250RX 2025
- HONDA CRF450L 2019
- HONDA CRF450L 2020
- HONDA CRF450L 2021
- HONDA CRF450L 2024
- HONDA CRF450L 2025
- HONDA CRF450R 2017
- HONDA CRF450R 2018
- HONDA CRF450R 2019
- HONDA CRF450R 2020
- HONDA CRF450R 2021
- HONDA CRF450R 2022
- HONDA CRF450R 2023
- HONDA CRF450R 2024
- HONDA CRF450RWE 2021
- HONDA CRF450RWE 2022
- HONDA CRF450RWE 2023
- HONDA CRF450RWE 2024
- HONDA CRF450RWE 2025
- HONDA CRF450RX 2017
- HONDA CRF450RX 2018
- HONDA CRF450RX 2019
- HONDA CRF450RX 2020
- HONDA CRF450RX 2021
- HONDA CRF450RX 2022
- HONDA CRF450RX 2023
- HONDA CRF450RX 2024
- HONDA CRF450RX 2025
- KAWASAKI KX250F 2025
- KAWASAKI KX250X 2025
- KAWASAKI KX450F 2019
- KAWASAKI KX450F 2020
- KAWASAKI KX450F 2021
- KAWASAKI KX450F 2022
- KAWASAKI KX450F 2023
- KAWASAKI KX450F 2024
- KAWASAKI KX450F 2025
- KAWASAKI KX450X 2021
- KAWASAKI KX450X 2022
- KAWASAKI KX450X 2023
- KAWASAKI KX450X 2024
- KAWASAKI KX450X 2025
- SUZUKI RM-Z450 2018
- SUZUKI RM-Z450 2019
- SUZUKI RM-Z450 2020
- SUZUKI RM-Z450 2021
- SUZUKI RM-Z450 2022
- SUZUKI RM-Z450 2023
- SUZUKI RM-Z450 2024
- SUZUKI RM-Z450 2025
Spring Large OD (mm) | 44.0 |
Spring Small OD (mm) | 44.0 |
Spring Free Length (mm) | 470 |
Related products
Eibach EMS Moto Rear Shock Spring Kit 64/66.5 x 24
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 881)
From
$249.94
KoubaLink Lowering Link 2023+ DL800DE V-Strom Stai
Lowering amounts indicate REAR lowering, NOT bike height(SKU: V800-1)
$506.00
Yamaha XTZ690 Tenere 700 Fork Upgrade Kit
For stronger offroad performance!(SKU: 30-161-01)
$699.00
More From This Category
Eibach EMS Moto Front Fork Spring Kit. 43.2 x 455
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 967)
From
$249.94
Eibach EMS Moto Front Fork Spring Kit. 36.7 x 510
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 996)
From
$249.94
KYB Genuine Front Fork Spring Each - 44mm od x 470
44mm od x 470mm free length(SKU: 11005-44-470)
From
$198.00
HiCalibre Fork Springs 38 x 470 KLX 250 300 1993-2
Proudly made in the USA(SKU: 19-114)
From
$295.00
HiCalibre Fork Spring 43.5 x 743 - Single (Eibach
Proudly made in the USA(SKU: 19-172)
From
$245.00
Teknik Fork Spring 43.5 x 660 - Single Function fo
Made in The Netherlands to ISO 9001(SKU: 43.5-660)
From
$165.00
HiCalibre Fork Springs 44.8 x 470 Common Fitment 4
Proudly made in the USA(SKU: 19-220)
From
$245.00
KYB Genuine Front Fork Spring Each - 44mm od x 497
44mm od x 497mm free length(SKU: 11005-44-497)
From
$198.00
HiCalibre Fork Springs 40.2 x 462 Common Fitment S
Proudly made in the USA(SKU: 19-145)
From
$245.00
HiCalibre Fork Springs 43.5 x 467 Common Fitment Y
Proudly made in the USA(SKU: 19-205)
From
$245.00
HiCalibre Fork Springs 34.7 x 340 Street Bikes
Proudly made in the USA(SKU: 19-077)
From
$295.00
Eibach EMS Moto Front Fork Spring Single. 42.7 x
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 966)
From
$249.94
HiCalibre Fork Springs 29 x 614 Common Fitment: Ho
Proudly made in the USA(SKU: 19-050)
From
$245.00
HiCalibre Fork Springs 41.2 x 460 (Eibach 981) Yam
Proudly made in the USA(SKU: 19-150)
From
$245.00
HiCalibre Fork Springs 42/35.2 x 290 FJR1300
Proudly made in the USA(SKU: 19-163)
From
$295.00
Eibach EMS Moto Front Fork Spring Single. 43.75 x
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 964)
From
$249.94
HiCalibre Fork Springs 28.3 x 560 (Eibach 912) Com
Proudly made in the USA(SKU: 19-045)
From
$295.00
HiCalibre Fork Springs 43.8 x 453 (Eibach 968) Com
Proudly made in the USA(SKU: 19-195)
From
$245.00
Eibach EMS Moto Front Fork Spring Kit. 32.6 x 446
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 915)
From
$249.94
HiCalibre Fork Springs 43.5 x 555 Common Fitment K
Proudly made in the USA(SKU: 19-209)
From
$295.00