Eibach EMS Moto Front Fork Spring Kit. 43.7 x 499 (43.5-497) Yamaha YZF WR 2018 on *Discontinued** use 904 series
Eibach's MOTO fork springs provide tuning capability for maximum perfromance and durability on any terrain.
- Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
- Ultra-Lightweight for Reduced Unsprung Mass
- Each Spring Individually Tested
- Highest Linearity and Guaranteed Consistency
- Made In U.S.A.
Note: Fork springs are sold as pairs unless for Single Function Fork applications as per image.
Note: We do not guarantee fitment, height or warranties on unlisted applications.
Eibach Limited Lifetime Warranty
1. Eibach Limited Lifetime Warranty
All Eibach, Inc. ("Eibach") Suspension Springs, Anti-Roll-Kits, Pro-Spacers, Pro-Dampers and Pro-Truck Shocks (including Sport and Sport Leveling), Pro-Truck Coilover Systems, Pro-Alignment Kits, (collectively, "Products") are covered by a limited lifetime warranty, (the Warranty). The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions. These Warranties only apply to the original purchaser, who has proof of purchase and retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach, Inc. will repair, replace or refund the purchase price of the defective product at Eibach, Inc.'s sole digression, which shall fully satisfy and discharge any and all warranty claims.
2. Exclusions from Warranty
This warranty does not apply to any products:
a. That have been improperly installed or have not been properly installed by a qualified, licensed auto mechanic experienced in the installation and removal of suspension products.
b. That have been improperly serviced, that have been misused, or that have been modified, altered or subjected to abuse, negligence, accident or collision.
c. Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits.
c. Installed on any vehicle that has been used for rallying, racing or racing-type activities or extreme off-road use.
d. Presented for warranty coverage by a person other than the purchaser.
e. Presented for warranty coverage after being used on a vehicle other than the one on which it was originally installed.
3. Reservation of Rights
Eibach reserves the right to make changes in design, materials and specifications, and to make changes to Products without prior notice. Eibach does not assume any obligation to modify any previously manufactured Products.
4. Exclusion of Other Warranties
This Warranty is the entire and only Warranty for the Products and may not be modified or supplemented by any other person or company in any form. Any description of the Products, by anyone, is for the sole purpose of identifying them, is not part of the basis of the bargain, and does not constitute a warranty that the Products will conform to that description. The use of any sample or model in connection with these Warranties or the sale of any Products is for illustrative purposes only and is not a warranty that the goods will conform to the sample or model. The statements of any salesperson do not constitute part of these Warranties or any warranty at all and cannot be relied upon as a warranty.
There are no warranties, expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose, which extend beyond the description on the face hereof. Any implied warranties are disclaimed to the fullest extent permitted by law and shall in no event exceed the purchase price of the product. These warranties do not cover consequential damages, loss of time or revenues, inconvenience, loss of use of the vehicle, damage to the vehicle or components of the vehicle, reimbursement for labor, any other type of consequential damages, or other incidental or indirect damages.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages; in such states the above limitations or exclusions may not apply. These Warranties give the Purchaser specific legal rights, and the Purchaser may have other rights that may vary from state to state.
5. Warranty Claim Procedure
To make a claim, the Purchaser should contact the Eibach dealer/ distributor from which the Products were originally purchased. The dealer/distributor should then contact Eibach to obtain a Return Goods Authorization (RGA) number to return the Products to Eibach.
Any and all returns must be accompanied by (1) an RGA number, (2) a sales receipt verifying the purchase of the Products, and (3) a statement containing the Purchaser's name, address, make and model of the vehicle, and a brief description of the claimed defect, including the circumstances under which the defect occurred.
Warranty related inquiries should be mailed to the following address:
Eibach Suspension Technology.
Unit 3/4 Prosperity Parade Warriewood NSW 2102
Eibach will not accept Product returns without the RGA number, receipt and statement described above. C.O.D. or collect shipments will be refused. Once the returns are received at Eibach, Eibach will evaluate the Products, verify the sales receipt, and investigate the statement.
The Purchaser is responsible for returning the Products to the Eibach dealer/distributor, including shipping costs as well as costs incurred for removing and installing the Products on the vehicle. Eibach does not warranty labor costs.
SKU | 963 |
Brand | Eibach Suspension Technology |
Shipping Weight | 1.5000kg |
Shipping Size | 0.140 x 0.060 x 0.580m |
Unit Of Measure | pair |
Assembled Length | 0.580m |
Assembled Width | 0.140m |
If your Motorcycle is listed below, this product will suit:
- KAWASAKI KX250F 2020
- KAWASAKI KX250F 2021
- KAWASAKI KX250F 2022
- KAWASAKI KX250F 2023
- KAWASAKI KX250F 2024
- KAWASAKI KX250X 2021
- KAWASAKI KX250X 2022
- KAWASAKI KX250X 2023
- KAWASAKI KX250X 2024
- SHERCO 500 SEF FACTORY 2019
- SUZUKI RM-Z250 2019
- SUZUKI RM-Z250 2020
- SUZUKI RM-Z250 2021
- SUZUKI RM-Z250 2022
- SUZUKI RM-Z250 2023
- SUZUKI RM-Z250 2024
- SUZUKI RM-Z250 2025
- TM EN125 2012
- TM EN125 2013
- TM EN125 2014
- TM EN125 2015
- TM EN125 2016
- TM EN125 2017
- TM EN125 2018
- TM EN125 2019
- TM EN144 2012
- TM EN144 2013
- TM EN144 2014
- TM EN144 2015
- TM EN144 2016
- TM EN144 2017
- TM EN144 2018
- TM EN144 2019
- TM EN250 2012
- TM EN250 2014
- TM EN250 2015
- TM EN250 2016
- TM EN250 2017
- TM EN250 2018
- TM EN250 2019
- TM EN250Fi 2012
- TM EN250Fi 2013
- TM EN250Fi 2014
- TM EN250Fi 2015
- TM EN250Fi 2016
- TM EN250Fi 2017
- TM EN250Fi 2018
- TM EN250Fi 2019
- TM EN300 2012
- TM EN300 2013
- TM EN300 2014
- TM EN300 2015
- TM EN300 2016
- TM EN300 2017
- TM EN300 2018
- TM EN300 2019
- TM EN300 2020
- TM EN300 2021
- TM EN300 2022
- TM EN300 2023
- TM EN300 2024
- TM EN300 2025
- TM EN450Fi 2012
- TM EN450Fi 2013
- TM EN450Fi 2014
- TM EN450Fi 2015
- TM EN450Fi 2016
- TM EN450Fi 2017
- TM EN450Fi 2018
- TM EN450Fi 2019
- TM EN530F 2012
- TM EN530Fi 2013
- TM EN530Fi 2014
- TM EN530Fi 2015
- TM EN530Fi 2016
- TM EN530Fi 2017
- TM EN530Fi 2018
- TM EN530Fi 2019
- TM MX125 2013
- TM MX125 2014
- TM MX125 2015
- TM MX125 2016
- TM MX125 2017
- TM MX125 2018
- TM MX125 2019
- TM MX144 2012
- TM MX144 2013
- TM MX144 2014
- TM MX144 2015
- TM MX144 2016
- TM MX144 2017
- TM MX144 2018
- TM MX144 2019
- TM MX250 2013
- TM MX250 2014
- TM MX250 2015
- TM MX250 2016
- TM MX250 2017
- TM MX250 2018
- TM MX250 2019
- TM MX250F 2012
- TM MX250F 2013
- TM MX250F 2014
- TM MX250F 2015
- TM MX250F 2016
- TM MX250F 2017
- TM MX250F 2018
- TM MX250F 2019
- TM MX300 2012
- TM MX300 2013
- TM MX300 2014
- TM MX300 2015
- TM MX300 2016
- TM MX300 2017
- TM MX300 2018
- TM MX300 2019
- TM MX450F 2013
- TM MX450F 2014
- TM MX450F 2015
- TM MX450F 2016
- TM MX450F 2017
- TM MX450F 2018
- TM MX450F 2019
- TM MX530F 2013
- TM MX530F 2014
- TM MX530F 2015
- TM MX530F 2016
- TM MX530F 2017
- TM MX530F 2018
- TM MX530F 2019
- YAMAHA WR250F 2020
- YAMAHA WR250F 2021
- YAMAHA WR250F 2022
- YAMAHA WR250F 2023
- YAMAHA WR250F 2024
- YAMAHA WR250F 2025
- YAMAHA WR450F 2019
- YAMAHA WR450F 2020
- YAMAHA WR450F 2021
- YAMAHA WR450F 2022
- YAMAHA WR450F 2023
- YAMAHA WR450F 2024
- YAMAHA WR450F 2025
- YAMAHA YZ125 2022
- YAMAHA YZ125 2023
- YAMAHA YZ125 2024
- YAMAHA YZ125 2025
- YAMAHA YZ125X 2022
- YAMAHA YZ125X 2023
- YAMAHA YZ125X 2024
- YAMAHA YZ125X 2025
- YAMAHA YZ250 2022
- YAMAHA YZ250 2023
- YAMAHA YZ250 2024
- YAMAHA YZ250 2025
- YAMAHA YZ250F 2014
- YAMAHA YZ250F 2015
- YAMAHA YZ250F 2016
- YAMAHA YZ250F 2017
- YAMAHA YZ250F 2018
- YAMAHA YZ250F 2019
- YAMAHA YZ250F 2020
- YAMAHA YZ250F 2021
- YAMAHA YZ250F 2022
- YAMAHA YZ250F 2023
- YAMAHA YZ250F 2024
- YAMAHA YZ250F 2025
- YAMAHA YZ250FX 2015
- YAMAHA YZ250FX 2016
- YAMAHA YZ250FX 2017
- YAMAHA YZ250FX 2018
- YAMAHA YZ250FX 2019
- YAMAHA YZ250FX 2020
- YAMAHA YZ250FX 2021
- YAMAHA YZ250FX 2022
- YAMAHA YZ250FX 2023
- YAMAHA YZ250FX 2024
- YAMAHA YZ250FX 2025
- YAMAHA YZ250X 2022
- YAMAHA YZ250X 2023
- YAMAHA YZ250X 2024
- YAMAHA YZ250X 2025
- YAMAHA YZ450F 2014
- YAMAHA YZ450F 2015
- YAMAHA YZ450F 2016
- YAMAHA YZ450F 2017
- YAMAHA YZ450F 2018
- YAMAHA YZ450F 2019
- YAMAHA YZ450F 2020
- YAMAHA YZ450F 2021
- YAMAHA YZ450F 2022
- YAMAHA YZ450F 2023
- YAMAHA YZ450F 2024
- YAMAHA YZ450F 2025
- YAMAHA YZ450FX 2016
- YAMAHA YZ450FX 2017
- YAMAHA YZ450FX 2018
- YAMAHA YZ450FX 2019
- YAMAHA YZ450FX 2020
- YAMAHA YZ450FX 2021
- YAMAHA YZ450FX 2022
- YAMAHA YZ450FX 2023
- YAMAHA YZ450FX 2024
- YAMAHA YZ450FX 2025
Teknik Part # 43.5-497
Spring Large OD (mm) | 43.7 |
Spring Small OD (mm) | 43.7 |
Spring Free Length (mm) | 499 |
Related products

Teknik Fork Springs 43.5 x 497 (Eibach 963)
Made in The Netherlands to ISO 9001(SKU: 43.5-497)
From
$235.00
More From This Category

Eibach EMS Moto Front Fork Spring Kit. 31.2 x 422
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 913)
From
$249.94

HiCalibre Fork Springs 38.0 x 480 Common Fitment 1
Proudly made in the USA(SKU: 19-133)
From
$295.00

HiCalibre Fork Springs 31 x 428 (Eibach 913) Commo
Proudly made in the USA(SKU: 19-065)
From
$245.00

Eibach EMS Moto Front Fork Spring Kit. 31.20 x 422
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 923)
From
$249.94

Eibach EMS Moto Front Fork Spring Single. 43.75 x
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 964)
From
$249.94

Eibach EMS Moto Front Fork Spring Kit. 43.9/43.9/4
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 904)
From
$249.94

HiCalibre Fork Springs 43.5 x 430 Common Fitment K
Proudly made in the USA(SKU: 19-196)
From
$245.00

HiCalibre Fork Springs 27 x 500 Common Fitment: Ka
Proudly made in the USA(SKU: 19-035)
From
$245.00

HiCalibre Fork Springs 34 x 443 Common Fitment Hon
Proudly made in the USA(SKU: 19-080)
From
$245.00

Eibach EMS Moto Front Fork Springs 45.00 mm O.D. x
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 903)
From
$249.94

HiCalibre Fork Springs 43 x 485 (Eibach 969) WP CC
Proudly made in the USA(SKU: 19-180)
From
$245.00

HiCalibre Fork Springs 23 x 445 Common Fitment: Ho
Proudly made in the USA(SKU: 19-020)
From
$295.00

HiCalibre Fork Springs 44.8 x 500 Common Fitment 4
Proudly made in the USA(SKU: 19-222)
From
$245.00

HiCalibre Fork Springs 38 x 470 KLX 250 300 1993-2
Proudly made in the USA(SKU: 19-114)
From
$295.00

Eibach EMS Moto Front Fork Spring Kit. 36.45 x 36.
Made in the USA (QS9000) or Germany (ISO16949)(SKU: 908)
From
$249.94

HiCalibre Fork Springs 33 x 365 Common Fitment Kaw
Proudly made in the USA(SKU: 19-075)
From
$295.00

HiCalibre Fork Springs 41.2 x 470 (Eibach 982) Hon
Proudly made in the USA(SKU: 19-155)
From
$245.00

HiCalibre Fork Springs 30 x 382 Common Fitment KTM
Proudly made in the USA(SKU: 19-055)
From
$245.00

KYB Genuine Single Linear Rate Fork Spring - 44od
Original KYB Motorcycle Suspension Spring(SKU: 11005-44-470)
From
$132.95

HiCalibre Fork Spring 43.5 x 743 - Single (Eibach
Proudly made in the USA(SKU: 19-172)
From
$245.00