![Kayaba (KYB) Genuine Parts](/assets/webshop/cms/92/292.jpg?1707696171)
Suspension Shaft Slide Collar - 6 x 8 x 5.0 **NLA** use 110530002101
6mm id x 8mm od x 5.0mm tall(SKU: 110530000401)
Special Order
Find your Bike:
All rebuildable suspensions need some basic shared parts - fasteners such as locknuts to hold damping pistons to base towers, teflon lined shaft collars or acetal rod bushes to hold sliding tubes concentric without too much friction, tiny mid-speed valve (also called refill or non-return) springs to help tune your shim stack, rubber o-rings to keep oil & gas pressure sealed from each other. Motorbike front fork legs & rear shock absorbers both need these when servicing or tuning, and here is where you'll find them.
While a bigger Fork Cartridge Rod Bush needs fancy friction-less coatings on the inner diameter to constantly slide, some pushrods don't get moved often, so only need a basic steel ring to stay aligned. Inside the middle cartridge rod of adjustable forks you'll often find these little metal collars keeping the adjuster push rods centred.
Other shared components that are in both forks and shocks are shims & washers - but Teknik Motorsport have so many that we have our own Valving Shims section - including complete bulk kits, ring shims, check shims, cup washers and valve stop washers. If you need to swap damping shims please see our Shim Factor Calculator - a 0.30mm shim is NOT the same as two 0.15mm shims.
If you are a bike workshop or a DIY suspension tuner you should stock up on these essential wear parts - they are in everything and should be replaced every rebuild. We also have technical articles that can give you an edge: learn more about those lock nuts and fasteners or become an expert on oils with our suspension fluid weights table.
For news and special member-only offers and discounts.
© 2024 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we use and protect any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may collect the following information:
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
You may choose to restrict the collection or use of your personal information in the following ways: