Motorcycle Shock Seal Case Shaft Bush

Motorbike shocks use a damping shaft that slides inside the main shock absorber body. To keep all the oil and nitrogen pressure inside that casing there is a lower seal head assembly between the two.

Rear dampers have multiple defences in there - an oil seal deep inside, a dust wiper on the outside, a rod bushing to keep it sliding concentrically, a rubber o-ring sealing the outer diameter and a rebound top out bumper facing inwards. That bump stop can be a rubber ring or a small steel coil spring, and it makes sure no damage happens if the shock piston bumps into the bottom case (like when you jump the bike).

These metal ring bushings keep the suspension shafts mounted centrally in the cases & sliding easily. We also sell complete assembled replacement seal heads to save time servicing your coilover shocks.