Automotive Suspension Valving Shims & Washers

 

All rebuildable suspensions need shims & washers - and Teknik has the largest collection - more than 2 million in stock. Our range isn't just standard valving shims either: complete bulk kits, ring shims, check shims, cup washers and valve stop washers. If you need to swap damping shims please see our Shim Factor Calculator - one 0.30mm shim is NOT the same as two 0.15mm shims.

There are other shared parts found in both front forks & rear shocks; locknuts to hold damping pistons to base towers, teflon lined shaft collars or acetal rod bushes to hold sliding tubes concentric without too much friction, tiny mid-speed valve (also called refill or non-return) springs to help tune your shim stack, rubber o-rings to keep oil and gas pressure sealed from each other. Motorbike suspensions need these when servicing or tuning, and you can find them in our fork locknuts & bushes and shock absorber locknuts & bushes.

Read more...
Teknik Shims
1319 Products Found
Teknik Motorsport

Suspension Shim - 9 x 26 x .15

09mm id x 26mm od x 0.15mm Thickness
(SKU: 09.26.15)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.15
Outside Ø D (mm):   26.0
$0.94
4730 In Stock

Teknik Motorsport

Suspension Shim - 9 x 26 x .20

09mm id x 26mm od x 0.20mm Thickness
(SKU: 09.26.20)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.20
Outside Ø D (mm):   26.0
$0.94
6210 In Stock

Teknik Motorsport

Suspension Shim - 9 x 26 x .25

09mm id x 26mm od x 0.25mm Thickness
(SKU: 09.26.25)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.25
Outside Ø D (mm):   26.0
$0.94
4610 In Stock

Teknik Motorsport

Suspension Shim - 9 x 28 x .15

09mm id x 28mm od x 0.15mm Thickness
(SKU: 09.28.15)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.15
Outside Ø D (mm):   28.0
$0.94
6640 In Stock

Teknik Motorsport

Suspension Shim - 9 x 28 x .20

09mm id x 28mm od x 0.20mm Thickness
(SKU: 09.28.20)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.20
Outside Ø D (mm):   28.0
$0.94
4350 In Stock

Teknik Motorsport

Suspension Shim - 9 x 28 x .25

09mm id x 28mm od x 0.25mm Thickness
(SKU: 09.28.25)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.25
Outside Ø D (mm):   28.0
$0.94
4720 In Stock

Teknik Motorsport

Suspension Shim - 9 x 30 x .15

09mm id x 30mm od x 0.15mm Thickness
(SKU: 09.30.15)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.15
Outside Ø D (mm):   30.0
$0.94
3990 In Stock

Teknik Motorsport

Suspension Shim - 9 x 30 x .20

09mm id x 30mm od x 0.20mm Thickness
(SKU: 09.30.20)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.20
Outside Ø D (mm):   30.0
$0.94
4190 In Stock

Teknik Motorsport

Suspension Shim - 9 x 32 x .20

09mm id x 32mm od x 0.20mm Thickness
(SKU: 09.32.20)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.20
Outside Ø D (mm):   32.0
$0.94
4810 In Stock

Teknik Motorsport

Suspension Shim - 9 x 35 x .20

09mm id x 35mm od x 0.20mm Thickness
(SKU: 09.35.20)
Inside Diameter d (mm):   9.0
Thickness (mm):   0.20
Outside Ø D (mm):   35.0
$0.94
4525 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 15 x .10

10mm id x 15mm od x 0.10mm Thickness
(SKU: 10.15.10)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.10
Outside Ø D (mm):   15.0
$0.94
4120 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 15 x .15

10mm id x 15mm od x 0.15mm Thickness
(SKU: 10.15.15)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.15
Outside Ø D (mm):   15.0
$0.94
4470 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 15 x .20

10mm id x 15mm od x 0.20mm Thickness
(SKU: 10.15.20)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.20
Outside Ø D (mm):   15.0
$0.94
4415 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 15 x .25

10mm id x 15mm od x 0.25mm Thickness
(SKU: 10.15.25)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.25
Outside Ø D (mm):   15.0
$0.94
4440 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 15 x .30

10mm id x 15mm od x 0.30mm Thickness
(SKU: 10.15.30)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.30
Outside Ø D (mm):   15.0
$0.94
4095 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 16 x .10

10mm id x 16mm od x 0.10mm Thickness
(SKU: 10.16.10)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.10
Outside Ø D (mm):   16.0
$0.94
7580 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 16 x .15

10mm id x 16mm od x 0.15mm Thickness
(SKU: 10.16.15)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.15
Outside Ø D (mm):   16.0
$0.94
4520 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 16 x .20

10mm id x 16mm od x 0.20mm Thickness
(SKU: 10.16.20)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.20
Outside Ø D (mm):   16.0
$0.94
4490 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 16 x .25

10mm id x 16mm od x 0.25mm Thickness
(SKU: 10.16.25)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.25
Outside Ø D (mm):   16.0
$0.94
4840 In Stock

Teknik Hard Parts

Suspension Shim - 10 x 16 x .30

10mm id x 16mm od x 0.30mm Thickness
(SKU: 10.16.30)
Inside Diameter d (mm):   10.0
Thickness (mm):   0.30
Outside Ø D (mm):   16.0
$0.94
4525 In Stock