You may have heard about our T700 setup, well we now have one for the World Raid as well. Bringing the same feel to its bigger brother.

 
We've spent years getting this kit just right through extensive testing both on the dyno and in the real world in harsh Australian conditions. Your bike will eat corrugations, whoops and erosion banks for brekky.

We’re not going to lie to you. The world raid shock is a remarkable step up from the standard T7 pre the 2025 face lift however we still found some room for improvement especially in the low speed. Add a 20-027 shock spring suited to your weight, and the difference will transform your bike!

We generally recommend the following spring rates (for more detailed rates, find your bike in the "Bike Fitment" Tab just above and type in your rider weight with gear):

  • Standard T7 - 6.95 kg/mm
  • 80kg rider - 7.5 kg/mm
  • 90kg rider - 8.0 kg/mm
  • 100kg rider - 8.5 kg/mm

This is not a DIY kit, there is no need to modify any of the included parts, however it is not a job for you if you've never serviced a shock absorber before. If you think you'd need more guidance than the instructions provided in the photo in the listing please have a local suspension specialist fit them for you.

This kit includes the following parts:

  • A billet damping piston with a low friction graphite-filled endless band installed
  • Shim stacks developed especially for the Tenere 700 World Raid
  • A pre-drilled rebound separator
SKU 25-066-27
Brand Teknik Hard Parts
Shipping Weight 0.3000kg
Shipping Size 0.014 x 0.012 x 0.016m

We Also Recommend

More From This Category